Audiovox P-942 Owner's Manual page 8

1. Switch the vehicle ignition "on" and the radio "on" (radio frequency or disc track number will be shown on the display panel).
2. Momentarily press the Time/Frequency (T/F) button to display the time of day. The press and hold the T/F button until the time
display flashes.
3. While the display is flashing, press the Down Tuning button (
Tuning button ( ) to adjust the minutes to the correct time.
4. When the correct time is shown on the display panel, press and release the TF button (or wait 5 seconds) for the display to
return to the normal indication.
If a problem should develop while operating the CD player, the following error codes may be displayed on the display panel:
ER-2: Indicates the disc is not loading properly. Try re-loading or pressing the Eject button. Check the condition of the
disc in use or try another disc.
ER-3: Indicates the disc is not ejecting properly. Try pressing the Eject button again. Check the condition of the disc
in use or try another disc.
ER-4: Indicates an error in the laser reading the disc. Eject the disc, make sure it is clean, undamaged, and loaded
correctly (label side up). Re-load the disc and check for proper operation or try another disc.
ER-5: Indicates excessive temperature conditions. CD play will resume when the temperature returns to the normal
range.
ER-6: Indicates a mechanism error. Eject the disc and try re-loading. Also try activating the Re-Set button
again.
ER-7: Indicates an error in the laser reading the disc. Eject the disc, make sure it is clean, undamaged, and loaded
correctly (label side up. Re-load the disc and check for proper operation or try another disc.
ER-8: Indicates an error in the laser reading the disc. Eject the disc, make sure it is clean, undamaged, and loaded
correctly (label side up). Re-load the disc and check for proper operation or try another disc.
If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.
SET T T T T T ING THE CLOCK SET SET ING THE CLOCK ING THE CLOCK
SET SET ING THE CLOCK ING THE CLOCK
) to adjust the hours and the A or P indication, and the Up
CD PL CD PLA A A A A YER ERR CD PL CD PL CD PL YER ERR YER ERROR CODES YER ERR YER ERR OR CODES OR CODES OR CODES OR CODES
-8-
?K
and try
128-6287A
8 of 12