Manual Clock Set; Tuner Band Setting - Samsung CHT-420 Instruction Manual

Manual Clock Set

If Auto Setup was unable to find a local TV station to set the DVD-
VCR's internal clock, follow these instructions to set the date/time
manually.
NOTE:
1
1
2
2,3
3
MAIN MENU
4
DVD VCR Options Language
Program Clock Clock Install Exit
Clock Set/Adjust
➛¤❿
RETURN œ ❷¤¤¤ ENTER
CLOCK SET/ADJUST
5
Auto
❿
Manual
RETURN œ ❷¤¤¤¤¤¤¤¤¤¤ ENTER
CLOCK SET/ADJUST
TIME DATE YEAR
12:00 A 1/01 2003 Wed
M
➛¤❿
RETURN œ ❷¤¤¤
18
Downloaded From DvDPlayer-Manual.com Samsung Manuals
It is important to set the clock for accurate Timer
Recording.
Open "MENU"
With the DVD in stop mode, press the MENU button.
Select "Clock"
Using the up/down and left/right buttons, move the selection cursor
to "Clock Set/Adjust," then press ENTER to select.
Select "Manual"
Move the selection arrow to "Manual", then press ENTER to select.
Set the Clock
Press LEFT/RIGHT to select each of the following options, then
press UP/DOWN to set each option:
• Set Hour – Set the hour using the up and down buttons.
• Set Minute – Set the minute using the up and down buttons.
• Set Month – Set the month using the up and down buttons.
• Set Day – Set the day using the up and down buttons.
• Set Year – Set the year using the up and down buttons.
Confirm Settings
Press the RETURN button to save your clock settings and return to
the Setup menu.
• Press Return again to exit.

Tuner Band Setting

This feature allows you to manually set the DVD-VCR's tuner band
to Antenna or Cable, whichever you connected to the Antenna In
jack during initial setup.
• Use this setting only if Auto Setup detected the incorrect tuner
band, i.e. channels are coming in on the wrong channel numbers.
1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "Install"
Using the up/down and left/right buttons, move the selection cursor
to "Installation", then press ENTER to select.
3 Select "Channel Setup"
Using the up/down and left/right buttons, move the selection cursor
to "Channel Setup", then press ENTER to select.
4 Select "Ant/Cable"
Move the selection arrow to "Ant/Cable" then press right to select
from the following options:
• Antenna - Indicates that the DVD-VCR is connected to an indoor
or outdoor VHF/UHF antenna.
• Cable TV - Indicates that the DVD-VCR is connected to Cable TV.
1
MAIN MENU
DVD VCR Options Language
Program Clock Install Install Exit
Installation
➛¤❿
RETURN œ ❷¤¤¤ ENTER
INSTALLATION
❿
Channel setup
Volume light : [Auto]
RETURN ENTER
œ ❷¤¤¤¤¤¤¤¤¤
CHANNEL SETUP
❿
Ant/Cable: [Cable TV]
Auto channel memory
Channel add/delete
➛¤❿
RETURN œ ❷¤¤¤
CHANNEL SETUP
❿
Ant/Cable: [Antenna]
Auto channel memory
Channel add/delete
➛¤❿
RETURN œ ❷¤¤¤
19