Table of Contents
Advertisement
Radio operations
Radio stations can be tuned manually by selecting the station's frequency or they can be preset into channels to make it easy to tune.
You can preset up to 20 FM channels and up to 12 AM channels.
Allocation settings
Each country allocates broadcast bands according to their particular system.
For U.S.A. and Canada
You can change the FM step. The step is factory-set to 0.2 MHz, but you can
change it to receive broadcasts allocated 0.1-MHz steps.
Any FM frequencies preset in channels will be changed by this procedure.
Preset them again.
For units with PX printed on the outer packaging
You can change the AM step. The step is factory-set to 10 kHz, but you can
change it to receive broadcasts allocated 9-kHz steps.
Any AM frequencies preset in channels will be changed by this procedure.
Preset them again.
TUNER BAND
1.
Select the opposite band from the one you are going to change
with [TUNER/BAND].
2.
Press and hold [TUNER/BAND] on the unit.
After a few seconds the display changes to show the current minimum
frequency. Continue to hold the button down. The minimum frequency
changes and the step is changed.
To return to the original step, repeat the above steps.
To improve reception
FM
Extend the whip antenna and
adjust its direction.
If noise is excessive in FM
You can improve FM reception by switching reception to monaural.
PLAY MODE
Press to turn the MONO
mode ON/OFF
Manual
Main unit
tuning
TUNER
Select"FM" or "AM"
Remote control
TUNER/
BAND
Select "FM" or "AM"
TUNER BAND
To adjust the volume
0
(Minimum)
AM
Change the direction and location
of the AM loop antenna.
MONO
BAND
Select the frequency
3
4
u
i
Select the frequency
TIMER ADJ
SET/CHECK
PGM/CLEAR
-AUTO PRESET
VOLUME
50
(Maximum)
Auto
tuning
Automatic
presetting
The tuner
presets all the
stations it can
receive into
channels in
ascending order.
Manual
presetting
Preset the
stations one at a
time.
Selecting
channels
4
OPEN/
LIGHT
DISPLAY
CLOSE
SLEEP
1
2
3
CLOCK/
4
5
6
Input using the numbered
TIMER
buttons
7
8
9
To select a 2-digit number
>
0
10
=
e.g. 11: [ 10] → [1] → [1]
AUX
CD
TUNER/
BAND
To adjust the volume
VOL
VOL
SC-EN17
EXTRA
SOUND
LIVE
PLAY
D.BASS
EQ
VIRTUALIZER
MODE
ALBUM
u
i
ALBUM
Main unit
TUNER
BAND
Select"FM" or "AM"
Press and hold until the
frequency starts changing
rapidly
Remote control
TUNER/
BAND
Press and hold until the
Select "FM" or "AM"
frequency starts changing
rapidly
• Auto tuning stops when it finds a station.
• To cancel auto tuning press the same button again.
Note
• Auto tuning may not function when there is
excessive interference.
Perform once for FM stations and once for AM stations.
TUNER/
BAND
Select "FM" or "AM"
Press and hold until
"AUTO" appears
Note
During automatic presetting, the memory indicator
(
) flashes and the frequency scrolls. The
PGM
memory
indicator
and
channel
displayed for a second when a station is preset.
The first station to be preset is displayed when
presetting finishes.
Within 10 seconds
Tune to
the signal
you want
PGM/CLEAR
to set as
-AUTO PRESET
the preset.
Enter preset mode
PGM
Note
The station occupying a channel is erased if another
station is preset over that channel.
Select "FM" or "AM"
Select a channel
Select "FM" or "AM"
Select a channel
> =
SC-EN15
PRESET TUNE
3
4
u
i
PGM/CLEAR
-AUTO PRESET
numbers
are
1
2
3
4
5
6
7
8
9
0
>
10
=
Select a channel
Advertisement
Table of Contents
