Connecting To The Tv; Reconnecting The Smar T Touch Control - Samsung LED 7500 series E-Manual

Connecting to the TV

In order to operate the TV using a Smart Touch Control, you must first pair it to the TV via Bluetooth.
However, the Smart Touch Control is only available for the paired Samsung TV.
"
We recommend to use the Smart Touch Control in less than 6m. A usable distance may differ depending on
the wireless environmental conditions.
11
To turn on the TV, point the Smart Touch Control at the remote control receiver of the TV and
press the TV button. The remote control receiver's location may vary depending on the model.
21
A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then
attempt to connect to the Smart Touch Control automatically.

Reconnecting the Smar t Touch Control

If the Smart Touch Control stops operating or works abnormally, replace the battery as this may
be caused by insufficient battery power. If the problem persists, press the
Smart Touch Control to restore pairing with the TV. The
removing the Smart Touch Control's battery cover. Within a distance between 30cm to 4m, point the
Smart Touch Control to the TV receiver and press the
pairing image displays at the bottom left of the TV screen.
<Attempting to connect and completion icons>
<The Smart Touch Control's pairing button>
PAIRING button cannot be accessed without
PAIRING button. When pairing is complete, the
PAIRING button on the