Table of Contents
Advertisement
C Select a programme
^ Switch the dryer on by pressing the
On/Off K button in.
Programme chart
– See separate booklet
"Commissioning, Programme chart
and Settings".
You can select a programme either by:
1. using the appropriate shortcut button
to select one of the four programmes
listed in the display ("favourites"), or
2. selecting a programme from the
Programme selection menu (turn A
and press B).
Select Low temperature or Timer if
required
^ If required, you can then select Low
temperature and/or the Timer (Delay
start time) from the relevant
sub-menu.
Short instructions
Payment system
If your tumble dryer has a payment
system, the amount of credit required
will appear in the display.
Opening the door or cancelling the
programme after it has started may
cause loss of credit (depending on
how the tumble dryer was set up).
D Start the programme
The Start button will flash as soon as a
programme can be started.
^ Press the Start button.
The Start button will now light up.
– Prog. running will appear in the
display, followed by Drying and the
programme duration.
– With sensor drying programmes the
drying level reached e.g. Machine
iron ... Hand iron...
etc. will appear in the display later
on.
Once drying is in progress, you can
press one of the shortcut buttons:
– Button E Timer to call up the
current time of day and the estimated
end time of the programme.
– Button F Save to save the current
programme as a favourite.
– Button G Cancel to cancel the
current programme.
23
Advertisement
Table of Contents
