14. TECHNICAL DATA...................22 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Old hose sets must not be reused. • If the mains power supply cable is damaged, it must be • replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. Before any maintenance operation, deactivate the •...
ENGLISH devices fitted (water meters, etc.), let • Do not touch the glass door while a the water flow until it is clean and clear. programme is in operation. The glass • Ensure that there are no visible water can get hot. leaks during and after the first use of 2.5 Service the appliance.
ENGLISH 5. PROGRAMMES 5.1 Programme Chart Programme Maximum Programme description Temperature load (Type of load and soil level) range Maximum spin speed Washing programmes 7 kg White cotton and coloured cotton. Normal soil Cottons 1600 rpm and light soil. 90°C - Cold 7 kg White cotton and fast-coloured cotton.
Page 8
Programme Maximum Programme description Temperature load (Type of load and soil level) range Maximum spin speed 1,5 kg Synthetic and mixed fabric items. Light soil and 14 Min. 800 rpm items to freshen up. 30° C 1) Standard programmes for the Energy Label consumption values. According to regu- lation 1061/2010, these programmes are respectively the «Standard 60°C cotton programme»...
ENGLISH 6. CONSUMPTION VALUES The data in this table are approximate. Different variables can affect the data: the quantity and type of laundry, the water and ambient temperature. At the start of the programme, the display shows the programme duration for the maximum load capacity.
7. OPTIONS 7.1 Temperature 7.4 Delay Start Set this option to change the default With this option you can delay the start of temperature. a programme from 30 minutes to 20 hours. Indicator = cold water. The display shows the related indicator.
ENGLISH indica- ■ ■ ■ ■ ■ ■ 1) If available. 2) Shortest: to freshen the laundry. 3) Longest: Increasing the programme dura- tion gradually decreases the energy con- sumption. The optimized heating phase saves energy and the longer duration main- tains the same washing results (specially for normal soil).
10. DAILY USE WARNING! 10.2 Using detergent and Refer to Safety chapters. additives 10.1 Loading the laundry 1. Measure out the detergent and the fabric conditioner. 1. Open the appliance door 2. Put the detergent and the fabric 2. Put the laundry in the drum, one item conditioner into the compartments.
ENGLISH 10.4 Liquid or powder detergent • Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid then the maximum level. •...
Page 14
10.9 Cancelling a running After approximately 15 programme minutes from the start of the programme: 1. Turn the programme knob to position • The appliance adjusts to cancel the programme and to automatically the deactivate the appliance. programme duration 2.
ENGLISH • Remove the laundry from the The appliance drains and appliance. Make sure that the drum is spins automatically after empty. approximately 18 hours • Close the water tap. (except for Wool programme). • Turn the programme knob to position to deactivate the appliance.
11.3 Detergents and additives 11.4 Ecological hints • Only use detergents and additives • Set a programme without the prewash specially made for washing machines: phase to wash laundry with normal soil. – powder detergents for all types of •...
ENGLISH 12.4 Door seal Regularly examine the seal and remove all objects from the inner part. 12.5 Cleaning the detergent dispenser 12.6 Cleaning the drain filter Do not clean the drain filter if the water in the appliance is hot.
Page 19
ENGLISH 12.7 Cleaning the inlet hose and the valve filter 45° 20° 12.8 Emergency drain When you drain the water with the emergency drain procedure, you must Because of a malfunction, the appliance activate the drain system again: cannot drain the water. 1.
12.9 Frost precautions 5. When the drain pump is empty, install the inlet hose again. If the appliance is installed in an area WARNING! where the temperature can be less than Make sure that the 0° C, remove the remaining water from the temperature is higher than 0 inlet hose and the drain pump.
Page 21
ENGLISH Problem Possible solution Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter of the inlet hose and the filter of the valve are not clogged.
Problem Possible solution Make sure that the appliance receives electrical power. This problem may be caused by a failure of the appliance. Contact the Authorised Service Centre. The appliance makes an Make sure the levelling of the appliance is correct. Refer to unusual noise.
ENGLISH Cold water Water supply Maximum Load Cotton 7 kg Energy Efficiency Class A+++ Spin Speed Maximum 1600 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 15. ENVIRONMENT CONCERNS Please recycle all materials marked with general house hold waste.