Related Manuals for Siemens WM10W460IL
Summary of Contents for Siemens WM10W460IL
- Page 1 Washing machine WM14W460IL, WM12W460IL, WM10W460IL siemens-home.com/welcome Register your product online ens-home.com/welcome...
-
Page 2: Your New Washing Machine
Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries. -
Page 3: Table Of Contents
Contents e n W a s h i n g m a c h i n e I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Cleaning and maintenance . . . 25 Intended use Machine housing/control panel ..26 I n t e n d e d u s e Drum ......26 For private domestic use only. -
Page 5: Safety Instructions
Safety instructions Reaching into the drum Safety instructions ■ when it is turning can cause injuries to hands. S a f e t o n s u c t i i n s t r Electrical safety Do not reach into the drum when it is turning. - Page 6 Safety instructions Warning Warning Danger of death! Eye/skin irritation! Children may lock themselves Detergents and care products in appliances, putting their lives may cause irritation if they at risk. come into contact with the eyes For appliances that have or skin. reached the end of their service Keep detergents and care life:...
-
Page 7: Environmental Protection
Environmental protection Energy-saving mode: The display ■ Environmental panel lighting goes out after a few minutes and the Ü button flashes. protection Press any button to activate the o n m e n t a l E n v i r c t i p r o t e lighting. -
Page 8: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t b r i e Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button. programme, e.g. -
Page 9: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance i n g G e t t k n o w t h e a n c e a p p l i Washing machine Detergent drawer ~ Page 21 Operating/display panel Door with door handle 9S Open the door... -
Page 10: Control Panel
Getting to know the appliance Control panel All the buttons are sensitive Note: H Changing the default programme (except for the main switch) and only settings: ~ Page 18 need to be pressed lightly. Temperature (Temp. °C), ■ Spin speed (Spin 0), ■... -
Page 11: Display Panel
Getting to know the appliance Display panel Further information Programme progress: Prewash Washing ¼ Rinse ¬ Spin - 0 - Programme end Programme end during Rinse Stop - P - Pause, e.g. to reload laundry Default programme settings: ( Temperature in °C Washing machine door: Ž... -
Page 12: Laundry
Laundry Some examples of soiling levels can Laundry be found on ~ Page 13 – Light: Do not prewash, select the L a u n d r y speedPerfect G setting if Prepare the laundry necessary – Normal Caution! – Heavy: Load less laundry, select Damage to the appliance/fabrics a programme with prewash Foreign objects (e.g. -
Page 13: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can g e n t D e t e r save energy (lower washing Correct selection of detergent temperature) and detergent. The care label is crucial for selecting Saving Soiling/note the correct detergent, temperature and... -
Page 14: Overview Of Programmes
Overview of programmes Overview of programmes O v e r v i p r o g r a m m e s Programmes on the programme selector Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and for which fabrics it is Temperature that can be selected suitable. - Page 15 Overview of programmes Programme/type of laundry/information Settings Mixed Fabrics Max. 4 kg Mixed load of cottons and synthetic fabrics Ž - 40 °C $ - 1600** rpm ecoPerfect ¦, speedPerfect G, Less ironing æ, Extra Rinse l Max. 2 kg Delicate / Silk For delicate, washable fabrics, e.g.
- Page 16 Overview of programmes Programme/type of laundry/information Settings *** Dark Wash Max. 3.5 kg Dark-coloured cottons and dark-coloured easy-care fabrics; Ž - 40 °C turn items inside-out before washing. $ - 1200 rpm ecoPerfect ¦, speedPerfect G, Less ironing æ, Extra Rinse l *** Hygiene Max.
-
Page 17: Starching
Overview of programmes Programme/type of laundry/information Settings *** Sportswear Max. 2 kg Sportswear and leisurewear made from microfibre fabrics; Ž - 40 °C Notes $ - 800 rpm Laundry must not be treated with fabric softener. ■ ecoPerfect ¦, speedPerfect G, Before washing, clean the detergent drawer thoroughly (all ■... -
Page 18: Soaking
Programme default settings Soaking Temperature (Temp. °C) Switch on the appliance. Select the Cottons 30 °C Depending on what stage the programme. programme is in, you can change the Pour soaking agent/detergent into set temperature before and during the compartment II in accordance with programme. -
Page 19: Finish In 5
Additional programme settings Finish in 5 Additional programme Before starting the programme, you settings can preselect the programme end ("Ready in" time) in hourly increments (h i o n a l A d d i t p r o g r a m m e i n g s s e t t... -
Page 20: Operating The Appliance
Operating the appliance The maximum load and the duration ■ Operating the of the programme (alternately) appliance In appliances with a drum light: The drum is lit after switching on the i n g O p e r a t t h e a n c e a p p l i... -
Page 21: Measure And Add Detergent And Care Products
Operating the appliance Measure and add detergent and care products Caution! Damage to the appliance Cleaning agents and agents for pre- treating laundry (e.g. stain removers, prewash sprays, etc.) may cause Measuring aid A for liquid detergent damage if they come into contact with Compartment II Detergent for the main the surfaces of the washing machine. -
Page 22: Change The Programme Default Settings
Operating the appliance Change the programme Note: Foam detection If the o symbol also lights up in the default settings display panel, the washing machine has detected too much foam during the You can use or change the default wash programme and automatically settings for this washing cycle. -
Page 23: Changing The Programme
Operating the appliance If the following appears in the display Programme end during rinse panel: hold Both the - P - and Ï symbols light ■ In the display panel, $ flashes, and the up, it is possible to add laundry. preset spin speed and remaining - P - lights up, it is not possible to ■... -
Page 24: Appliance Settings
Appliance settings Always wait until the programme Changing the signal volume ■ ends, as the appliance could still be locked. Then switch the appliance Use the Finish in 5 + or - button to on and wait for it to unlock. change the following settings at the If the display panel goes off at the corresponding programme selector... -
Page 25: Sensors
Sensors Sensors Cleaning and maintenance S e n s o r s Automatic load sensing C l e a n i a n d e n a n c e m a i n t Warning Depending on the type of fabric and Danger of death! load, the automatic load sensing There is a risk of electric shock if you... -
Page 26: Machine Housing/Control Panel
Cleaning and maintenance Machine housing/control Fit the insert and lock it in place (push the cylinder onto the guide panel pin). Push in the detergent drawer. Wipe the housing and the control ■ panel with a soft, damp cloth. Leave the detergent drawer open Note: Remove the detergent residue ■... -
Page 27: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Carefully unscrew the pump cover; The drain hose at the siphon residual water may leak out. is blocked Clean the interior, pump-cover thread and pump housing. The Switch off the appliance. Pull out the impeller in the drain pump must be mains plug. -
Page 28: Faults And What To Do About Them
Faults and what to do about them. For standard and Aqua-Secure Wait until the drum has stopped turning. models, clean the filter on the rear of Caution! the appliance: Water damage Remove the hose from the rear of the appliance. Any escaping water may cause water Use pliers to remove the filter and damage. -
Page 29: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/Remedy - P - and Ï The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■... - Page 30 Faults and what to do about them. Faults Cause/Remedy The drum briefly jerks or Not a fault – the internal motor test may cause the drum to jerk or judder briefly judders after the when the wash programme starts. programme has started. The water is not draining.
-
Page 31: After-Sales Service
After-sales service Faults Cause/Remedy The display panel/ Has there been a power failure? ■ indicator lamps do not Have the fuses blown? Reset/replace the fuses. ■ work while the appliance If the fault occurs repeatedly, call customer services. ■ is running. There is detergent Some phosphate-free detergents contain water-insoluble residue. -
Page 32: Consumption Rates
Consumption rates Consumption rates C o n s u m p t i r a t e s Energy and water consumption, programme duration and residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption** consumption** duration** Cottons 20 °C... -
Page 33: Technical Data
Technical data Technical data T e c h n i c d a t a Dimensions: 850 x 600 x 590 mm (height x width x depth) Weight: 70 - 85 kg (depending on model) Mains connection: Mains voltage 220 - 240 V/50 Hz Nominal current 10 A Nominal power 2300 W Water pressure:... -
Page 34: Safety Instructions
Positioning and connecting Installation surface Useful tools Spirit level for aligning ■ Spanner with: The washing machine be stable Note: ■ – WAF13 for loosening the so that it does not move around. transport braces, and The installation surface must be firm ■... -
Page 35: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transport brace screws. -
Page 36: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Do not immerse the Aqua-Stop safety valve in water (it contains an electric valve). Left-hand connection ■ Notes Only operate the washing machine ■ using cold mains water. Do not connect the machine to the ■... -
Page 37: Water Outlet
Positioning and connecting Water outlet Connection Connect the water supply hose to the Warning tap (26.4 mm = ¾") and to the Risk of scalding! appliance (not necessary for Aqua-Stop When you are washing at high models as this is permanently installed): temperatures, there is a risk of scalding Model: Standard if you come into contact with hot water... -
Page 38: Levelling
Positioning and connecting Levelling Connection Drainage into a washbasin Align the appliance using a spirit level. ■ Incorrect alignment may result in loud noises, vibrations and machine "movement". Loosen the lock nuts using a WAF17 spanner, by turning it in a clockwise direction. -
Page 39: Electrical Connection
Positioning and connecting Electrical connection The mains cable does not come into ■ contact with heat sources. Warning Before washing for the first Danger of death! There is a risk of electric shock if you time touch live components. Never touch or hold the mains plug The washing machine was thoroughly ■... -
Page 40: Transportation
Positioning and connecting Transportation Before switching on the appliance again: E.g. when moving house Notes Preparatory work: The transport braces must be ■ Turn off the tap. removed. Reduce the water pressure in the Pour approx. 1 litre of water into ■... - Page 44 A call set-up fee of up 6 pence may apply.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Siemens-Electrogeräte GmbH Carl-Wery-Straße 34, 81739 München siemens-home.com *9001015296*...