JVC KW-R910BT Instruction Manual page 14

BLUETOOTH®
PHONE
Selects the phone or audio device to connect or disconnect.
" " appears in front of the device name.
AUDIO
APPLICATION Shows the connected phone name using the JVC Smart Music
1
Control * app. " " appears in front of the device name.
DELETE PAIR 1 Turn the volume knob to select a device to delete, then
press the knob.
2 Turn the volume knob to select [YES] or [NO], then press
the knob.
PRIORITY Selects a device to be connected as priority device. " "
appears in front of the device name set as priority.
• "NO PAIR" appears if there is no registered device found.
P.BOOK Copies up to 400 numbers from the phonebook memory of a
2
WAIT * connected phone.
SET PINCODE Changes the PIN code (up to 6 digits).
(0000) 1 Turn the volume knob to select a number.
2 Press S / T to move the entry position.
1
Repeat steps
code.
3 Press the volume knob to confirm.
AUTO CNNCT ON: The unit automatically reconnect when the Bluetooth
device is within range. ; OFF: Cancels.
INITIALIZE YES: Initializes all the Bluetooth settings (including stored
pairing, phonebook, and etc.). ; NO: Cancels.
INFORMATION MY BT NAME: Displays the unit name (JVC UNIT). ;
MY ADDRESS: Shows address of this unit.
* 1
JVC Smart Music Control is designed to view JVC car
receiver status and perform simple control operations
on Android smart phones. For JVC Smart Music Control
operations, visit JVC website: <http://www.jvc.net/cs/car/>.
* 2
Selectable only when the connected phone supports OPP.
14
Default: XX
2
and until you finish entering the PIN
Internet radio via Bluetooth
Listen to Pandora
Preparation:
Select [ON] for [PANDORA] in [SRC SELECT]. ( 4)
You can listen to Pandora on your smart phone (Android OS) through Bluetooth on
this unit.
1 Open the Pandora application on your device.
2 Connect to Bluetooth audio player. ( 10)
3 Press B /SOURCE to select PANDORA.
The source switches and broadcast starts automatically.
• You can operate Pandora in the same way as Pandora for iPod/iPhone. ( 9)
Bluetooth audio player
Operations and display indications may differ according to their availability on the
connected device.
To
Playback 1
2
Pause or resume
playback
Select group or folder
Reverse/forward skip
Reverse/fast-forward
Repeat play
Random play
Do this
Press B /SOURCE to select BT AUDIO.
Operate the Bluetooth audio player to start
playback.
Press MENU (or press on RM-RK52).
Press J / K (or press J / K on RM-RK52).
Press S / T (or press H / I on RM-RK52).
Press and hold S / T (or press and hold H / I on
RM-RK52).
Press 3 B repeatedly to make a selection.
TRACK RPT, ALL RPT, RPT OFF
Press 2 A repeatedly to make a selection.
GROUP RND, ALL RND, RND OFF