Dodge 2016 Viper SRT ACR Owner's Manual page 14

2.5 Hood Vents (Continued)
Installing Hood Vent
1. Install the vent into hood opening by seating fixed tabs along lower
edge before rotating top edge of the vent into place.
2. Once vents are installed, install both clips by securely holding rear
section of clip (1) and pushing nose of clip through bezel window
and opening (2).
NOTE: Ensure Center tongue (3) is securely inserted and engaged through
bezel window (Edge Highlighted In RED).
WARNING: Risk of loss or damage possible if vents and/or
clips are installed improperly.