Basic Play; Using The Main Unit - Panasonic SC-PT953 Operating Instructions Manual

Panasonic operating instruction dvd home theater sound system sc-pt950, sc-pt1050, sc-pt953
Table of Contents

Advertisement

Basic play

To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).
≥ To change your television's video input mode, refer to its operating instructions.
1
Power on.
2
Select "DVD/CD".
POWER
1
Press to select a disc directly.
≥ You can also select the disc using the remote
control (➜ page 18, Checking and selecting
the disc).
1
2
5 DISC SELECTOR

Using the main unit

Select the
DISC
next disc
tray
Exchange the
disc in the
DISC
play position
16
POWER
SELECTOR
2
3
4
5
5 DISC SELECTOR
3
4
5
SKIP
≥ The drawer opens and the disc
in the play position comes to the
front-left position.
EXCHANGE
≥ Press the button again to play
the disc after changing the disc
in the front-left position.
3
Open the drawer and place the disc(s).
≥ Load double-sided discs so the label for the side you want to
play is facing up.
≥ To load discs on the other trays, press [DISC SKIP] on the
main unit.
≥ Play will start from the disc in the front-left position of the
tray.
≥ For DVD-RAM, remove the disc
from its cartridge before use.
≥ Do not:
– load more than one disc per tray.
– touch the drawer or the carousel while they are in motion.
– rotate the carousel by hand.
– close the drawer by hand.
4
Close the drawer.
SELECTOR
TUNING
Press to skip.
Press and hold to
– search during play
– start slow-motion play during pause
(Motion picture part)
≥ Press [1] (Play) to start normal play.
Change the
other discs
without
interrupting
play
[Note[
≥ DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED.
To preserve the unit's motor and your television screen, press [∫] (Stop)
when you are finished with the menus.
≥ Total title number may not be displayed properly on iR/iRW.
∫ (Stop)
DISC EXCHANGE
DISC SKIP
DISC
EXCHANGE
SKIP
OPEN CLOSE
VOLUME
MUSIC PORT
TUNE MODE
FM MODE MEMORY
SETUP MIC
5
Start play.
≥ Press [r, s VOLUME] to adjust
the volume.
≥ You can enjoy surround sound
when you press [ÎPLII/S.SRD]
to turn on Dolby Pro Logic II
(➜ page 32).
OPEN CLOSE
≥ Each time you press [DISC
DISC
SKIP
SKIP], you can select the other
trays.
Change the
discs
OPEN CLOSE
OPEN CLOSE
OPEN CLOSE
+,
VOLUME

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-pt1050Sc-pt950

Table of Contents