Cutter Maintenance; Blade Life - Panasonic ER240 Operating Instructions Manual

P00-06(ER240欧州)EN 05.9.12 14:13 ページ 6

Cutter Maintenance

(Fig. 5)
1. Remove the comb attachment.
2. Hold the body of the trimmer and place the thumb against the blade and push
away from the main body.
3. Brush hair from the cutting mechanism.
4. Push down the cleaning lever to raise the moving blade, and brush between the
blade.
5. To re-assemble, place the guide tabs in the guide sites as shown below, and push
down until cutter assembly clicks into place.

Blade Life

Blade life varies according to frequency and length of usage. Using the unit ten minutes
a day every three days, for example, results in a life expectancy of approximately three
years.
Caution
1. If the body becomes dusty, clean only with a damp or slightly soapy cloth. Never
use a corrosive cleaner such as benzine or bleach, or immerse the unit in water.
2. Keep out of reach of children.
3. Never use the trimmer on pet hair.
4. During normal operation, the blades and body of the trimmer may become warm.
This is normal.
5. If the trimmer is not used for a long time, remove the batteries to prevent possible
leakage.
6. Do not use new batteries with old ones.
6