Republic Of Ireland - Panasonic DMP-BD10A Operating Instructions Manual

Settings
11 Changing the unit's settings
Tabs
Dynamic Range Compression [BD-V] [DVD-V]
Sound
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
Change the dynamic range (➡ 30, Glossary) for
late night viewing.
Digital Audio Output
Change the settings when you have connected equipment through this unit's digital audio out terminal (➡ 10).
≥Press [ENTER] to show the following settings.
BD-Video Function Sound [BD-V]
This will set the operation sounds you hear from the
menu, etc. while playing a BD-Video disc. Please
note that if you have selected "Bitstream" digital
audio output (➡ above), these sounds will not be
heard even if this is set to "On".
Display
Language
Choose the language for these menus and on-
screen messages.
On-Screen Messages
Choose whether to show status messages
automatically.
FL Display
Changes the brightness of the unit's display.
Software License
Connection TV Aspect
Set to match the type of television connected.
RQT8966
§
"Language" can only be selected in the United Kingdom, Republic of Ireland and Continental European models.
22
Menus
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz or 88.2 kHz.
≥Signals are converted to 48 kHz or 44.1 kHz
despite the settings across if the signals have
a sampling frequency of over 96 kHz or
88.2 kHz, or the disc has copy protection.
≥[BD-V] Refer to "BD-Video Function Sound"
(➡ below).
Dolby Digital Select how to output
the signal. If
"Bitstream" is selected,
the bitstream is output
from the unit and the
Dolby Digital Plus/
connected equipment
Dolby TrueHD
decodes the signal.
If "PCM" is selected,
this unit decodes the
signal and output it as
2 channel from
DIGITAL AUDIO OUT
DTS
terminal.
[Note]
Not making the proper
settings may result in
noise, or some trouble
for digital recording.
DTS-HD
MPEG
§
Options (Underlined items are the factory presets.)
≥On ≥Off
≥On: Signals are converted to 48 kHz or 44.1 kHz. (Choose when the
connected equipment cannot process signals with sampling
frequency of 96 kHz or 88.2 kHz.)
≥Off: Signals are output as 96 kHz or 88.2 kHz. (Choose when the
connected equipment can process signals with sampling
frequency of 96 kHz or 88.2 kHz.)
≥Bitstream: When connecting to equipment displaying the Dolby Digital
logo.
≥PCM:
When connecting to equipment not displaying the Dolby
Digital logo.
≥Bitstream: The bitstream signal of Dolby Digital is output.
≥PCM:
Dolby Digital Plus or Dolby TrueHD PCM sound is output in
2 channels.
≥Bitstream: When connecting to equipment displaying the DTS logo.
≥PCM:
When connecting to equipment not displaying the DTS
logo.
≥Bitstream: The bitstream signal of DTS Digital Surround is output.
≥PCM:
DTS-HD PCM sound is output in 2 channels.
≥Bitstream: When connected to equipment with a built-in MPEG
decoder.
≥PCM:
When connected to equipment without a built-in MPEG
decoder.
≥On ≥Off
[Note]: When "On" is selected, sampling frequency is converted to
48 kHz. Sound is output at higher than 48 kHz sampling
frequency only when both this item and "PCM Down Conversion"
are set to "Off".
≥English ≥Deutsch
≥Español ≥Nederlands
≥Automatic ≥Off
≥Bright
≥Dim:
The display is dimmed and the illumination lamp is turned
off.
≥Automatic: The display is dimmed and the illumination lamp is turned
off during playback, and reappears if a button is pressed.
Information about the software used by this unit is displayed.
Regular aspect television (4:3)
≥4:3 Pan & Scan: Video recorded for a widescreen is played as Pan &
Scan (unless prohibited by the producer of the disc).
When playing BD-Video, video is output as "4:3
Letterbox".
≥4:3 Letterbox:
Video recorded for a widescreen is played in the
letterbox style.
Widescreen television(16:9)
≥16:9:
Video recorded for 4:3 aspect screen is displayed as
a 4:3 ratio image in the centre of the screen.
≥16:9 full:
Video recorded for 4:3 aspect screen is displayed as
a horizontally stretched 16:9 image.
≥Français ≥Italiano