BMW 1 SERIES 2013 Owner's Manual page 73

Controls
2 Button for:
>
Confirming selected display or set
values
> Calling up computer information
3 When the lights are on: instrument lighting
brightness 94
4 Calling up Check Control
5 Checking oil level
6 Initializing the Flat Tire Monitor
Resetting the Tire Pressure Monitor
7 Setting the time
8 Setting the date
9 Viewing service requirement display
10 Setting formats and units of measure,
resetting to factory settings
Formats and units of measure
In the instrument cluster
Setting the units of measure
You can set formats and units of measure.
1. Switch on the ignition, refer to page 54.
2. Briefly press button 1 in the turn signal/high
beam lever up or down repeatedly until the
symbol appears in the display, accompa-
nied by the word "SET".
3. Press button 2.
4. Use button 1 to select desired format or
desired unit of measure, e.g. for fuel con-
sumption.
72
Controls overview
70
76
168
81
82
75
75
73
72
Online Edition for Part no. 01402911200 - © 06/13 BMW AG
11 Adjusting settings
> Confirmation signals when locking and
unlocking the vehicle
> Response during unlocking
procedure 25
> Automatic locking
> Pathway lighting
>
Daytime running lights
> Triple turn signal activation
> Seat and mirror memory
Exiting displays
The outside temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
> Fuel consumption: mpg, km/l,
l/100km
> Distance covered: mls, km
> Time: 12h, 24h format
> Date: day.month dd.mm,
month/day mm/dd
> Temperature: 7, 6
5. Press button 2.
6. Use button 1 to make the setting.
7. Press button 2.
The setting is stored for the remote control
currently in use.
27
29
91
91
64
47