Table of Contents
Advertisement
Confirming the reception
You can confirm the DAB signal level. This is useful when you set the antenna.
A , B , D
DAB optional settings
While listening to a DAB station, the functions listed below are available.
"Option" menu
Full Scan
Scans stations manually.
Clock auto-update
This unit's clock can be updated automatically in conjunction with the clock
information received from DAB station. You can set this function to "ON"/
"OFF". (Default setting is set to "OFF".)
Manual tune
You can specify the DAB frequency band and it shows the level of the DAB
signal. This function can be used when installing the DAB/FM antenna to
check the signal strength.
Back
Exits the "Option" menu.
A Press OPTION when the source is "DAB".
Option menu is shown on the information display.
B Press TUNING to select "Manual tune"
and press OPTION.
C Press TUNING to change the channel
B , C
label.
The measured DAB signal reception level is
displayed.
The level is from 0 (none) to 100 (best).
D Press OPTION to exit the option setting.
y
When performing Manual tune and the DAB signal is
weak, try adjusting the position of the antenna to
obtain good reception.
You can perform these functions by the following
steps.
A Press OPTION.
A , C
B Press TUNING to select the setting.
C Press OPTION to confirm.
B
Function
LISTENING TO DAB STATIONS
☞ page
7
-
9
-
9
En
Advertisement
Table of Contents
