Nikon COOLPIX AW120 Quick Start Manual page 33

B
Do Not Point the Lens at Strong Light Sources for Extended
Periods
Avoid pointing the lens at the sun or other strong light sources for extended
periods when using or storing the camera. Intense light may cause
deterioration of the image sensor, producing a white blur effect in
photographs.
B
Turn the Product off Before Removing or Disconnecting the
Power Source
Do not remove the battery while the product is on, or while images are being
saved or deleted. Forcibly cutting power in these circumstances could result
in loss of data or in damage to product memory or internal circuitry.
B
Notes About the Monitor
Monitors and electronic viewfinders are constructed with extremely high
precision; at least 99.99% of pixels are effective, with no more than 0.01%
being missing or defective. Hence while these displays may contain pixels
that are always lit (white, red, blue, or green) or always off (black), this is not
a malfunction and has no effect on images recorded with the device.
Due to the general characteristics of OLED monitors, prolonged or repeated
display of the same screen or image may result in screen burn. Screen burn
can be recognized by decreased brightness in portions of the monitor or
mottled display. In some cases, screen burn may become permanent.
However, images are in no way affected by screen burn.
To prevent screen burn, do not set monitor brightness higher than
necessary and do not display the same screen or image for an extended
period of time.
Images in the monitor may be difficult to see under bright lighting.
The monitor is lit by an LED backlight. Should the monitor begin to dim or
flicker, contact your Nikon-authorized service representative.
B
About the Manuals
Nikon will not be held liable for any damages resulting from the use of this
product.
33
Notices