Konica Minolta KIP 600 User Manual page 107

d. If the KIP IPS is in a workgroup setting (No Domain Controller/Active Directory
Server), the authorization credentials will be supplied by the destination
workstation/server (WS06). If the user is connecting to a shared resource on a
workstation (Scans folder) with the NetBIOS (computer) name of WS06, the user
would input WS06 for the Domain section. The KIP IPS would get the authorization
credentials from the WS06 workstation.
e) Touch the Share Path button to enter the name of the shared folder on the destination
workstation or server.
a. The shared folder on the destination workstation must be accessible by the user as
supplied in the Username setting.
b. These permissions should include the ability to write and modify on this shared
folder.
f) Username and Password should be set as an accessible login username from either the
workgroup workstation/server or the authentication server/domain controller.
g) Touching on Test SMB will make the KIP IPS attempt to establish a connection to the
destination workstation/server.
a. This is a semi-permanent mapped network drive (Z:)
b. The connection is established when the SMB mailbox is selected and is
disconnected when:
i. Switching Formats
ii. Pressing the STOP button
iii. Switching menus (SCAN, COPY, JOB INFO, ?)
iv. Selecting another mailbox
v. Creating another SMB mailbox
vi. Reset timer expiration
vii. Log off
4-22 Section 4 Scan Mode - Monochrome