Nikon COOLPIX AW120 User Manual page 144

Problem
Cannot rotate image.
Images are not
displayed on TV.
Nikon Transfer 2 does
not start when camera
is connected to a
computer.
The PictBridge startup
screen is not displayed
when the camera is
connected to a printer.
Images to be printed
are not displayed.
Cannot select paper
size with camera.
F16
Cause/Solution
• This camera cannot rotate images captured
with another make or model of digital
camera.
• Images edited using Data imprint cannot
be rotated.
• HDMI is not correctly set in the TV
settings setup menu.
• A computer or printer is connected to the
camera.
• The memory card contains no images.
Replace the memory card. Remove the
memory card to play back images from the
internal memory.
• The camera is off.
• The battery is exhausted.
• The USB cable is not correctly connected.
• The camera is not recognized by the
computer.
• The computer is not set to start Nikon
Transfer 2 automatically. For more
information about Nikon Transfer 2, refer to
help information contained in ViewNX 2.
With some PictBridge-compatible printers, the
PictBridge startup screen may not be
displayed and it may be impossible to print
images when Auto is selected for the Charge
by computer option in the setup menu. Set
the Charge by computer option to Off and
reconnect the camera to the printer.
• The memory card contains no images.
Replace the memory card.
• Remove the memory card to print images
from the internal memory.
The camera cannot be used to select the
paper size in the following situations, even
when printing from a PictBridge-compatible
printer. Use the printer to select the paper size.
• The printer does not support the paper
sizes specified by the camera.
• The printer automatically selects the paper
size.
A
–
67,
E18
77,
E74
92, 95,
E23
17
22
22
92, 95
–
97
77,
E75
16
17
92,
E25,
E26
–