Specifications; Standard Accessories - Panasonic WV-CP280 Operating Instructions Manual

Specifications

Power source and
power consumption:
Image sensor:
Effective pixels:
Scanning area:
Scanning system:
Scanning frequency:
Scanning:
Synchronization:
Resolution:
Minimum illumination:
Signal-to-noise ratio:
Video output:
Lens mount:
White balance:
Light control mode setting:
Switch function:
Ambient temperature:
Ambient humidity:
Dimensions:
Weight:
Weights and dimensions indicated are approximate.

Standard Accessories

Operating Instructions (this book) .............. 1 pc.
Warranty card ............................................. 1 pc.
WV-CP280: 120 V AC 60 Hz, 3.4 W
WV-CP284: 24 V AC 60 Hz, 2.7 W, 12 V DC, 220 mA
1/3 inch interline transfer CCD
768 (H) x 494 (V)
4.9 mm (H) x 3.7 mm (V)
2 : 1 interlace
Horizontal: 15.734 kHz
Vertical: 59.94 Hz
525 lines/60 fields/30 frames
Internal (INT), multiplexed vertical drive (VD2) or line-lock (LL)
Horizontal: 540 TV lines (at center)
Vertical: 350 TV lines (at center)
0.8 lx {0.08 foot-candle} at F1.4, 0.6 lx {0.06 foot-candle} at F1.2
50 dB (equivalent to AGC Off, weight On)
1.0 V[P-P] NTSC composite 75 Ω (BNC)
CS-mount
ATW
ALC/ELC
Light control mode selector (ALC/ELC), Backlight compensation
selector (ON/OFF), Adaptive Black Stretch selector (ON/OFF),
Simple day/night mode selector (ON/OFF), Synchronization mode
selector (INT/LL)
–10 °C - +50 °C {14 °F - 122 °F}
Less than 90 %
67 (W) x 65 (H) x 139.5 (D) mm
{2-5/8"(W) x 2-9/16"(H) x 5-1/2"(D)}
(excluding the lens connector)
WV-CP280: 510 g {1.12 lbs.}
WV-CP284: 350 g {0.77 lbs.}
15