Download Print this page

Advertisement

Quick Links

Important Safety Instructions and Maintenance
Important Safety Instructions
CAUTION
Risk of electronic shock, do not open.
Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
In case of smoke, strange noise or strange smell
from the unit:
Turn off the power switch immediately;
Disconnect the power plug from the power
outlet;
Contact your dealer or service centre. Never
attempt to make repairs yourself because this
could be dangerous.
Never push objects of any kind into the set
through the cabinet slots as they may touch
dangerous voltage points or short-circuit parts that
could result in a fire or electric shock. Never spill
liquid of any kind on the set. Use special caution
in households where children are present. The
apparatus is not suitable for children under 3-year
to operate.
Power supply cords should be routed safety to
prevent life and property from dangerous with
damaged cord.
Mains plug is used as the disconnect device. It
shall remain readily operable and should not be
obstructed during intended use. To be completely
disconnected the apparatus from supply mains, the
mains plug of the apparatus shall be disconnected.
The apparatus shall be connected to a mains
socket outlet with a protective earthing connection.
To avoid the fire, no naked flame source,
such as lighted candles, should be
placed on the apparatus.
High Voltage
Do not open
1

Advertisement

loading

Summary of Contents for Hyundai kl22ns62

  • Page 1 Important Safety Instructions and Maintenance Important Safety Instructions CAUTION Risk of electronic shock, do not open. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. High Voltage Refer all servicing to qualified service personnel.
  • Page 2 Important Safety Instructions and Maintenance Important Safety Instructions An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
  • Page 3 Important Safety Instructions and Maintenance Installation Do not place the set on an unstable cart, stand, table or shelf. The set may fall, causing serious personal injury as well as damage to the product. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
  • Page 4: Table Of Contents

    Contents General description Specifications and accessories Overview Basic operation External connection Trouble shooting Picture defects and countermeasures Basic operation...
  • Page 5: General Description

    General description Feature: Zero X radiation complies to green environment protection requirement Auto tuning and fine tuning One composite video input socket One S-Video input socket One PC VGA input socket One YPbPr input socket One HDMI input socket (HDMI 1.3) Two audio input sockets Headphones One AV output socket...
  • Page 6: Specifications And Accessories

    Specifications and accessories Specifications: Description KL19NS62 KL22NS62 19" Diagonal (max.) 22" Diagonal (max.) 1366X768 1366X768 AC ~110-240V 50/60Hz 2WX2 2WX2 458X209X357mm TV with stand 530 209 393 Dimensions (LXWXH) TV without stand 458X77X318mm 530 77 TV with stand 4.0 Kg 4.6 Kg...
  • Page 7: Overview

    Overview . Power switch Press this button to turn TV on or off. 2. Power indicator Blue: Normal playing status. Red: Standby status. 3. IR remote sensor Point remote control at this sensor to conduct remote control. . INPUT Press this button to display the selected signal source as main source.
  • Page 8 Overview YPb/Cb Pr/Cr AV AUDIO OUT Connect to YPbPr/YCbCr video. Audio out for external devices. AV VIDEO OUT Note: HDMI is supporting for DVI commutator. Video out for external devices.
  • Page 9 Overview Remote control POWER YPbPr YPbPr HDMI HDMI INPUT SOUND ZOOM ZOOM INPUT SOUND PICTURE DIGITAL BUTTONS INFO RECALL INFO RECALL SLEEP NICAM SLEEP NICAM FREEZE MUTE VOLUME UP PROGRAM UP PROGRAM DOWN VOLUME DOWN ARROW BUTTONS MENU EXIT MENU EXIT Loading batteries: Remove the lid of the battery compartment.
  • Page 10: Basic Operation

    Basic operation Remote control introduction 1. LED Press any button, the led will light. 2. POWER Press this button to switch to standby mode, and press it again to turn TV on. 3. TV Switch to TV mode directly. 4.YPbPr Switch to YPbPr mode directly.
  • Page 11 Basic operation (to be continued) 15. SLEEP Press SLEEP button on the remote control, and press it again to select a time: 15 Min, 30Min, 45Min, 60Min, 90Min, 120Min. If you select OFF, the timer is closed. The TV will turn to standby mode automatically when the preset time is up. Press MENU button can exit the timer setting.
  • Page 12 Basic operation (to be continued) Turning the TV On and Off Press POWER button on the remote control can switch the TV between on(blue light indicator) and standby(red light indicator).It's suggested that you can let the TV in standby mode only for a shor time.If you won't use it for a long time,please switch off the power YPbPr HDMI...
  • Page 13 Basic operation (to be continued) Press / Arrow button to enter the submenu and press Arrow button to select the language you desire. Selecting input source Press INPUT button on the remote control, then you can select input sources as follows: S-VIDEO YPBPR...
  • Page 14 Basic operation (to be continued) SKIP Press Arrow button to select “SKIP”, then press / Arrow button to select “On” or “Off”. Fine Tune In case of bad image or sound of TV program, you can use Fine Tune function to obtain satisfying image or sound with operating steps as follows: ii) Press Arrow button to select “Fine Tune”...
  • Page 15 Basic operation (to be continued) SWAP CURRENT CHANNEL,TARGET CHANNEL and EXCHANGE are used to swap two programs' numbers. PICTURE AUDIO SETTING FUNCTION CHANNEL CURRENT CHANNEL TARGET CHANNEL EXCHANGE ADJUST SELECT MENU EXIT a) Current Channel Press Arrow button to adjust current channel number. b) Target Channel Press Arrow button to adjust target channel number.
  • Page 16 Basic operation (to be continued) Adjusting the Contrast of picture Press Arrow button to select the “Contrast”, then press / Arrow button to set contrast to your desire. Adjusting the Saturation of picture Press Arrow button to select the “Saturation”, then press / Arrow button to set saturation to your desire.
  • Page 17 Basic operation (to be continued) to adjust its value. Adjusting Balance of sound Press Arrow button to select “Balance”, use Arrow button to adjust sound balance. Adjust AVL mode Press Arrow button to select “AVL”, use / Arrow button to select “on” or “off”.
  • Page 18 Basic operation (to be continued) Function setup Press MENU button on the remote control, press / Arrow button to select “Func tion” menu. PICTURE AUDIO SETTING FUNCTION CHANNEL 3D DLC NO SIGNAL SLEEP SLEEP TIMER ADJUST SELECT MENU EXIT Press Arrow button Adjusting DNR option, it can improve the picture sharpness.
  • Page 19 Basic operation (to be continued) The way to adjust Brightness, contrast, backlight, color temperature and scale mode,please refer to “Adjusting the Picture” on Page15 -16. Note: If the TV turn to standby mode for VGA non-signal state, then you input a signal to VGA terminal, it will wake up to work.
  • Page 20: External Connection

    External connection Connect the external equipment to the back panel of this television as shown in the following figure: D V D w ith c o mp on en t Stereo system ( Y, P b /Cb ,P r /Cr) He ad p ho ne S - Vide o A n te n na...
  • Page 21 External connection Antenna connection Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected to the antenna jack directly, if the antenna cable is a 300ohm flat feeder cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the antenna jack.
  • Page 22 External connection 2. How to assemble the stand? Before attaching/detaching the stand, make sure to turn off the TV. - Before performing work spread cushioning over the base area to lay the LCD TV on. This will prevent it from being damaged. Assembling instruction: 1.
  • Page 23: Trouble Shooting

    Trouble shooting If you have any problem, check the countermeasure for each symptom listed below. The following symptoms may have caused by inappropriate adjustment rather than actual malfunction of the unit. If the trouble persists, contact the service center. Problem Possible Solution Try another channel.
  • Page 24: Picture Defects And Countermeasures

    Picture defects and countermeasures The most common types of television interference are as following: SNOWY PICTURE Snowy picture is usually caused due to weak signal. Adjust antenna or install an antenna amplifier. DOUBLE IMAGES OR “GHOSTS” Double images are usually caused by reflections from tall buildings.
  • Page 25 39032905...
  • Page 26 KL19NS62/KL22NS62...

This manual is also suitable for:

Kl19ns62