TH-103PF9UK / TH-103PF9EK
6. Remove 5 screws and then remove CX-Board.
6.36. Removal of CY-Board
1. Remove the Reinforcement Angle (B).
(Refer to Removal of SD-Board)
2. Remove 6 screws of the flexible cable.
3. Remove the flexible cables from the connectors (CB3, CB4,
CB5, CY0, CY1, CY3).
4. Disconnect the connectors (CY2, CY4).
5. Remove 6 screws and then remove CY-Board.
6.37. Removal of CZ-Board
1. Remove the Side Angle (R).
(Refer to Removal of Side Angle (R))
2. Remove the Reinforcement Angle (B).
(Refer to Removal of SD-Board)
3. Remove 4 screws of the flexible cable.
4. Disconnect the connector (C4).
5. Remove the flexible cables from the connectors (CB1, CB2,
CZ1).
32