Table of Contents
Advertisement
Installing and Configuring the Tape Drive for the
NonStop S-Series Server
10. Connect the other end of the power cord to a nearby AC power outlet.
Note. The tape drive does not have protection against lightning surges. Customers in high-risk
areas should use external surge protection rated for use in their location and be able to handle
the power demand of the tape drive.
11. Power on the tape drive by pressing the power switch on the front of the unit. For
the location, see
Figure 2-1
on page 2-1.
5243 Tape Drive Installation and User's Guide —542758-003
2 -3
Installation
Advertisement
Table of Contents
