Table of Contents
Advertisement
Operating your Refrigerator
03 Cool Select+ /
Change Mode (3 sec)
28 English
DA68-03174Z-00.indb 28
Hold down the Cool Select+ button for 3 seconds to enter the
freezer setting mode for the freezer.
Keep pressing the button to cycle through and select a
desired mode from one of the following:
Select "Freezer" to run the freezing mode
for the freezer. Note that you must use the
Freezer button on the control panel if you
want to change the temperature.
Select "Soft Freeze" to set the temperature
to 23 °F (-5 °C).
This feature helps keep meat and fish
fresh longer.
Select "Chill" to set the temperature to
30 °F (-1 °C).
Select "Cool" to set the temperature to
35 °F (2 °C).
You can keep water, juice, soft drinks, beer,
etc. cold.
CAUTION
• If you switch the current mode to another freezer mode,
food stored in the freezer may spoil.
• If you select a Cool Select+ setting that is not appropriate
to the food you are going to store, the food may freeze or
spoil.
• If the refrigerator turns on after being off for an extended
period of time (for example, after a power failure), Cool
Select+ may be reset to the factory default. If this occurs,
check if the previous setting remains. If not, re-select the
setting manually.
2015. 6. 19.
2:22
Advertisement
Table of Contents
