Recording Pictures In Raw Format - FujiFilm X-A3 Owner's Manual

Recording Pictures in RAW Format

Recording Pictures in RAW Format
To record raw, unprocessed data from the camera image sensor, select a RAW option for image qual-
ity in the shooting menu as described below. JPEG copies of RAW images can be created using the
j RAW CONVERSION option in the playback menu, or RAW images can be viewed on a computer
using the RAW FILE CONVERTER application (P 111).
1
Press MENU/OK in shooting mode to display the shooting menu. Press the selector up or down to
highlight T IMAGE QUALITY and press MENU/OK.
2
Highlight an option and press MENU/OK. Select RAW to record only RAW images, or FINE+RAW or
NORMAL+RAW to record both JPEG copy together with the RAW images. FINE+RAW uses lower
JPEG compression ratios for higher-quality JPEG images, while NORMAL+RAW uses higher JPEG
compression ratios to increase the number of images that can be stored.
The Fn Button The Fn Button
To toggle RAW image quality on or off for a single shot, assign RAW to the Fn button. If a JPEG option is cur-
rently selected for image quality, pressing the Fn button temporarily selects the equivalent JPEG+RAW option. If
a JPEG+RAW option is currently selected, pressing the Fn button temporarily selects the equivalent JPEG option,
while if RAW is selected, pressing the Fn button temporarily selects FINE. Taking a picture or pressing the Fn
button again restores the previous setting.
R Sensitivities of L (100), H (12800), and H (25600) are not available when RAW image quality is on (P 71).
78