Table of Contents

Advertisement

Before each use of the UTV, check and
remove the sand, leaves and other foreign
objects from the gap between the protection
net and oil cooler. Then wash the sand from
the air flowing gap in the oil cooler, ensure
the air flow goes smoothly in it. If the net is
broken, immediately replace a new one,
because the flying stone can easily break the
oil cooler and cause oil leak.
CAUTION:
If the oil cooler is blocked, it will make the oil
temperature overheated and damage the
engine.
Periodic Maintenance and Adjustment

Coolant

The coolant level should be checked before
each ride.
Checking the Coolant Level
1. Place the vehicle on a level surface.
2. Open the hood. (See pages 8-6 - 8-7 for
hood opening and closing procedures.)
3. Check the coolant level in the coolant
reservoir when the engine is cold as the
coolant level varies with engine
temperature.
NOTE:
The coolant should be between the minimum
and maximum level marks.
8-21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

400utv-2

Table of Contents