Memory; Auto Load Control; Pre-Wash Water; Main Wash Water - Miele PW 5065 Operating And Installation Instructions

Settings/Supervisor level menu

Memory

If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of the programme.
When this programme is chosen again
these settings will appear in the
display.
The machine is delivered with the
memory function deactivated.

Auto load control

If the Auto load control is
deactivated, the machine will always
carry out the programme sequence
based on a full load.
The machine is delivered with this
option activated.

Pre-wash water

You can choose for the pre-wash to
be carried out with either hot or cold
water (not available with the Curtains
programme). Hot water can only be
only taken in if the wash temperature
is above 30°C.
The machine is delivered with the Hot
water option selected.
72

Main wash water

You can choose for the main wash to
be carried out with either hot or cold
water (not available with the Woollens
and Curtains programmes). Hot
water can only be taken in if the wash
temperature is above 30°C.
The machine is delivered with the Hot
water option selected.
If the machine is not connected to
the hot water supply, the programme
durations will be longer and will vary
from the time remaining shown in the
display.

Rinse water

You can choose for the rinses in the
Cottons and Minimum iron
programmes to be carried out with
either hot or cold water. Hot water
can only be taken in if the wash
temperature is above 50°C.
The machine is delivered with the Cold
water option selected.