Verifying Settings; Returning To The Initial Settings - Panasonic PT-LW80NT Network Operation Manual

Network/Security setting of the projector

Verifying settings

Your current settings appear.
Select [STATUS] at the network menu and press the [ENTER] button.
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
RETURN
SELECT
ENTER
The status of the following will appear.
WIRED LAN
DHCP "ON" - "OFF"
IP ADDRESS (See page 47)
SUBNETMASK (See page 47)
DEFAULT GATEWAY (See page 47)
MAC ADDRESS

Returning to the initial settings

You can reset the network setting to the factory default of the projector.
1
Select [INITIALIZE] at the network menu and press the [ENTER] button.
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
RETURN
SELECT
ENTER
The entry of the password is prompted if [Password setting] is turned [ON] in the [
2
Select [OK] with the [
button.
WIRED LAN
S-MAP
WIRELESS LAN
NAME CHANGE
PASSWORD OFF
PASSWORD CHANGE
NETWORK STANDBY OFF
ON
NETWORK CONTROL
OFF
LIVE MODE CUT IN
COMPUTER SEARCH
MULTI-LIVE
STATUS
INITIALIZE
WIRELESS LAN
ANTENNA LEVEL
NETWORK
MODE
CHANNEL
SSID
AUTHENTICATION
DEFAULT KEY
ENCRYPTION
DHCP
IP ADDRESS
SUBNETMASK
DEFAULT GATEWAY
MAC ADDRESS
WIRED LAN
WIRELESS LAN S-MAP
NAME CHANGE
PASSWORD OFF
PASSWORD CHANGE
NETWORK STANDBY OFF
NETWORK CONTROL ON
OFF
LIVE MODE CUT IN
COMPUTER SEARCH
MULTI-LIVE
STATUS
INITIALIZE
] buttons and press the [ENTER]
(cont.)
(The strength of the connection will appear.)
"S-MAP", "1" - "4", "USER1" - "USER3"
"AD-HOC" - "INFRASTRUCTURE"
Refer to page 5 for usable channels.
(See page 49)
"OPEN" - "SHARED" - "WPA-PSK" - "WPA2-PSK"
"-" - "1" - "4"
"NONE" - "WEP" - "TKIP" - "AES"
"ON" - "OFF"
(See page 48, 50)
(See page 48, 50)
(See page 48, 50)
Security] menu.
54
INITIALIZE
INITIALIZE
OK CANCEL
RETURN
SELECT
ENTER