Connecting the signal to the SD-SDI input module
SD-SDI input module (optional) ET-MD77SD1 (for 480i/576i)
SD-SDI Module
ET-MD77SD1
• Insert the input module suitable for the input signal specifications.
• Normally, use SYSTEM SELECTOR in "AUTO".
Automatic detection may malfunction if any unstable signal is connected. If this happens, switch to a
system that is compatible with the signal format using the SYSTEM SELECTOR button.
• Use the SYSTEM SELECTOR button to toggle the systems of the input module that supports two types of
signal specifications. Upon toggling, the input signals are displayed on the screen and cleared
automatically.
IN
OUT
SERIAL
SD-SDI signal
SD-SDI signal output
(active through)
Business
digital VCR
AUTO
576i
LAN
LAN terminal
(10BASE-T / 100BASE-TX)
For details on the network
function, refer to page 82.
480i
29