Table of Contents
Advertisement
Pairing steps
1.
Turn on the TV, and then move the glasses within 19.5 inches
of the TV.
2.
Press the power button on the 3D glasses briefly. The 3D
glasses will power on and pairing will start.
3.
The message "3D glasses are connected." wil be displayed
on the TV screen when the pairing is successfully completed.
• If the pairing failed, the 3D glasses will power off.
• If the first attempt to pair fails, power the TV off and on again
and perform step 2.
• How to pair again: Press the power button on the 3D glasses
for more than 1 seconds.
Troubleshooting
If you encounter...
My 3D glasses do not work.
The LED keeps blinking
pecifications (Model Number: SSG-5100GB )
Optics
Weight
Power
Power consumption
Operating conditions
✎
Product specifications may be changed without notice in order to enhance product performance.
✎
The continuous operating time may differ depending on the wireless communication environment and usage conditions.
[DTV_F6100]BN68-04795H.indb 12
Try this...
Re place the battery.
The 3D glasses should be close to the TV. Make sure that the distance between the TV
and your 3D glasses is less than 19.5 feet (6m) in a straight line.
Check the 3D function settings of your TV.
The battery is dead. Replace the battery.
Shutters
Liquid crystal
Recommended
2 ~ 6m (6.5 to 19.5 ft)
operating distance
Glasses
21.5g/.76 oz. (including the battery: 24.0±0.5g/.85.±.018oz. )
Glasses
One 3V lithium/manganese dioxide battery 3V(CR2025)
Glasses
0.85mA (Average)
Type
Battery
Operating time
Operating temperature
50 °F ~ 104 °F (10°C ~ 40°C)
Custody temperature
-4 °F ~ 113 °F (-20°C ~ 45°C)
English - 12
Pairing is needed again in the following
situations
• If the 3D glasses do not function, even when the power button
is pressed, especially with a 3D TV after a repair.
• If you want to play 3D content on another Samsung 3D TV
model that belongs to the D, E, or F series released in 2011
through 2013.
Watching 3D Video
Some 3D modes may not be available depending on the
format of the image source.
To watch in 3D, you must wear 3D Active Glasses and turn
the glasses on by pressing the power button.
1.
Go to the 3D screen. (Picture > 3D)
2.
Select the 3D Mode. The 3D Mode screen appears.
3.
Set the 3D
Transmittance
Field Rate
165mAh, 3.0V (CR2025)
150 hours
36±2%
120 fields/second
2013-03-20
6:35:00
Hide quick links:
Advertisement
Table of Contents
