Honda 1998 Prelude Owner's Manual page 55

Table of Contents

Advertisement

Indicator Lights
Anti-lock Brake
U.S.
Canada
System (ABS)
ABS
Indicator
This light normally comes on for a
few seconds when you turn the
ignition switch ON (II), and when
the ignition switch is turned to
START (III). If this light comes on at
any other time, there is a problem in
the ABS. If this happens, take the
vehicle to your dealer to have it
checked. With the light on, your
vehicle still has normal braking
ability but no anti-lock.
Instruments and Controls
Active Torque Transfer
ATTS
System (ATTS) Indicator
Type SH only
This indicator normally comes on for
a few seconds when you turn the
ignition switch ON (II).
If it comes on at any other time,
there is a problem in the Active
Torque Transfer System (ATTS).
If this happens, take the vehicle to
your dealer to have it checked. With
the indicator on, your vehicle will
corner normally, but you will not
have active torque transfer.
Turn Signal and
Hazard Warning
Indicators
The left or right turn signal light
blinks when you signal a lane change
or turn. If the light does not blink or
blinks rapidly, it usually means one
of the turn signal bulbs is burned out
(see page 210). Replace the bulb as
soon as possible, since other drivers
cannot see that you are signalling.
When you turn on the Hazard
Warning switch, both turn signal
lights blink. All turn signals on the
outside of the vehicle should flash.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents