Honda 1993 Accord Coupe Owner's Manual page 152

Changing a Flat Tire (cont'd)
9. Everytime you install the wheel on the brake hub, use a clean rag
to wipe any dirt off the mounting surface of the hub and the
wheel. This will assure a tight, even contact between the wheel
and hub.
10. Install the spare, and lug nuts hand tight.
11. Lower the car, remove the jack, then tighten the lug nuts
securely in an " X " pattern as shown.
12. Tighten the lug nuts to the recommended torque:
110 N.m (11 kg-m,80 Ib-ft)
If a torque wrench was not used, ask an authorized Honda dealer
to verify the torque as soon as possible.
TIGHTENING TORQUE
110 N.m (11 kg-m, 80 Ib-ft)