ITEM
Chassis fasteners
Fuel
Lights, signals and switches
NOTE:
Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be thoroughly accom-
plished in a very short time; and the added safety it assures is more than worth the time involved.
WARNING
If any item in the PRE-OPERATION CHECK is not working properly, have it inspected and repaired before op-
erating the motorcycle.
The engine and exhaust system will be very hot after the engine has been run. Be careful not to touch them or
to allow any clothing item to contact them during inspection or repair.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Check fuel level.
• Fill with fuel if necessary.
• Check for proper operation.
PRE-OPERATION CHECKS
CHECKS
4-2
PAGE
—
3-7 ~ 3-8
—
4