Volvo 2008 V70 Owner's Manual page 79

Low beams
When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control
is in position or
Daytime running lights can be deactivated by an authorized Volvo workshop.
NOTE
The use of daytime running lights is mandatory in Canada.
Continuous high beams cannot be activated when the headlight switch is in position
flash will function in these positions.
High beam flash
Move the lever toward the steering wheel to position
High/low beam headlights
Continuous high beams
Set the ignition to mode II.
With the light switch in position
between high and low beams (this also applies on models equipped with the optional Active Bi-Xenon® headlights).
The symbol illuminates in the instrument panel to indicate that the high beams are on.
90
03 Your driving environment
Lighting
Active Bi-Xenon® Lights (ABL)-option
.
, pull the turn signal lever toward the steering wheel to position
. The high beams come on until the lever is released.
or . High beam
to toggle