PERIODIC MAINTENANCE AND MINOR REPAIR
1. Cowling A
2. Cowling B
2. Disengage the cowling by sliding it
forward (for A) or backward (for B),
then pulling it outward.
6
1. Slot (× 2)
2. Projection (× 2)
To install
1. Fit the slots and projections at the
rear bottom of the cowlings togeth-
er and slide the cowling into place.
6-7
1. Tab (× 2)
2. Place the cowling in its original po-
sition. Make sure that the tabs at
the front of the cowlings fit side by
side as shown and that all slots
and projections fit together.
3. Install the screws.