D 4.7 Arc - ABB Freelance 2000 Manual

Section D

D 4.7 Arc

→ Draw → Arc
→ Mark starting point by clicking mouse, draw circle or ellipse
→ Finish it by clicking mouse,
→ Mark starting point of the arc by clicking mouse,
move the cursor clockwise: arc gets larger,
move the cursor anti-clockwise: arc gets smaller,
→ Mark end point of the arc by clicking mouse,
Subsequent changing of the arc size is not possible.
The arc is part of the circumference of an ellipse or a circle. The start and end
points are connected by a curve.
Arcs are specified with the attributes line color, line style, line width and
arrow.
di0512.bmp
Construction of an arc:
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
Graphic Display
di0547uk.bmp
D-19