Direct Code Entry - GE RM84911 Instruction Manual

Direct Code Entry

1. Press and hold the SETUP button until
the red indicator stays on, then release
the SETUP button.
2. Press and release the desired device
button (TV, VCR, etc.). The red indicator
blinks, then stays lit.
3. Enter the 3 digit code
from the code tables
(on separate sheet).
Note: after a valid
code entry, the red
indicator turns off. For
an invalid code, the
red indicator fl ashes.
4. With your device on, press ON•OFF.
If the device turns off, no further
programming is required. Note: If
some buttons do not operate your
equipment, try one of the other
codes for your brand.
Write your codes down here for easy reference
later.
Device Device Device
TV TV
CBL/SAT
DVD/VCR
Device stored Code Device stored Code Device stored Code
TV TV
6