Ligent Light System - Mercedes-Benz 2012 A-Class Owner's Manual

X
Press the : or 9 button to select the
Permanent display:
You will see the selected setting:
temperature Dig. speedo
or
X
Press the a button to save the setting.
i
The speed is displayed in mph.
Lights
Switching the daytime driving lights on/
off
Daytime driving lights
The
only be switched on with the engine turned
off.
X
Press the = or ; button on the steer-
ing wheel to select the
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Daytime driving lights
Daytime driving lights
If the
has been switched on, the cone of light and
the W symbol in the multifunction dis-
play are shown in orange.
X
Press the a button to save the setting.
Further information on daytime driving lights
( Y page 105).
Switching the Intelligent Light System
on/off
X
Press the = or ; button on the steer-
ing wheel to select the
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Intell. Light System
Intell. Light Sys.
If the
been switched on, the cone of light and the
L symbol in the multifunction display
are shown in orange.
X
Press the a button to save the setting.
function.
outside
[mph].
function can
Settings
menu.
function.
function
Settings
menu.
function.
function has
Menus and submenus
Intell. Light System
If you activate the
function, you activate the following functions:
motorway mode
R
active light function
R
cornering light function
R
extended range foglamps
R
If you set the dipped-beam headlamps for
driving on the right/left, the multifunction
Intell. Light System:
display shows the
system inoperative Inactive for
left-side traffic
System: System inoperative Inactive
for right-side traffic
Intell. Light Sys.
instead of the
Lights
in the submenu (
Further information on the Intelligent Light
System ( Y page 108).
Setting the dipped-beam headlamps for
driving on the left/right
X
Press the = or ; button on the steer-
ing wheel to select the
X
Press the : or 9 button to select the
Lights submenu.
X
Press a to confirm.
X
Press : or 9 to select the
beams Setting for:
You will see the selected setting:
side traffic Left-side
or
X
Press the a button to save the setting.
If you change the setting, conversion does
not take place until the next time the vehi-
cle is stationary.
This function is only available on vehicles with
the Intelligent Light System.
You can use this function to switch between
symmetrical and asymmetrical dipped beam
( Y page 104).
If you set the dipped-beam headlamps for
driving on the right/left, then motorway
mode and the extended range foglamps are
unavailable.
You can also have the dipped-beam head-
lamps set for driving on the right/left at a
Intell. Light
or
display message
function
Y
page 221).
Settings
menu.
Dipped
function.
Right-
traffic.
Z
221