Cleaning Fuel Tank; Checking And Replacing Anode(S) - Coleman F15BM Owner's Manual

7. Insert and tighten the gear oil drain screw (If necessary, change the seal spacer).
WARNING:
Keep away from sparks, cigarettes, flames, or other sources of ignition when cleaning the fuel
tank.
Cleaning the fuel tank in a well-ventilated open air.
1. Empty the fuel tank into an approved container.
2. Pour a small amount of suitable solvent into the tank. Install the cap and shake the tank. Drain the
solvent completely.
3. Pull the fuel joint assembly out of the tank.
4. Clean the filter in a suitable cleaning solvent and allow it to dry.
5. Replace the gasket with a new one. Reinstall the fuel joint assembly and tighten the screws firmly.
Inspect the external anodes periodically. Remove scales from the surfaces of the anodes. Consult a
dealer for replacement of external anodes.
CAUTION:
Do not paint anodes, as this would render
them ineffective and can cause more rapid
engine corrosion.

3.10 Cleaning fuel tank

3.11 Checking and replacing anode(s)

46