System Setup - Honeywell RTH2410 Quick Installation Manual

System setup

About your new thermostat
Follow the procedure below to personalize and con-
figure the thermostat according to the heating/cooling
system.
1. Press and hold the
(for three seconds) until the display appears as
shown below.
1
2. Press the
3. Press the
second to advance to the next function.
4. When the last function is displayed, press the
t buttons to save any changes and exit the menu.
NOTE: If you do not press any button for 60 seconds
while you are in the setup menu, the thermostat auto-
matically saves any changes made and exits the menu.
At any time you can save the changes and exit by
pressing the Run button.
s and t buttons simultaneously
0
s or t button to change the option.
s and t buttons simultaneously for one
RTH2510/RTH2410
Function number
Option number
13
s and
69-2421ES—03