Installing The Display Hinges; Removing The Camera - Dell Latitude E6540 Owner's Manual

Hide thumbs Also See for Latitude E6540:
Table of Contents

Advertisement

e.
display assembly
f.
display bezel
g.
display panel
3.
Perform the following steps as shown in the illustration:
a. Remove the screws that secure the display hinges to the display assembly.
b. Remove the display hinges from the computer.

Installing the Display Hinges

1.
Place the display hinges in its location on the computer.
2.
Tighten the screws to secure the display hinges to the display assembly.
3.
Install:
a.
display panel
b.
display bezel
c.
display assembly
d.
base-corner cover
e.
base cover
f.
display-hinge cap
g.
battery
4.
Follow the procedures in

Removing the Camera

1.
Follow the procedures in
2.
Remove:
a.
battery
b.
display assembly
c.
display bezel
3.
Perform the following steps to remove the camera:
a. Disconnect the camera cable.
b. Remove the screw that secures the camera module.
c. Lift the camera module from the computer.
After Working Inside Your
Before Working Inside your
Computer.
computer.
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents