Stihl MS 193 Instruction Manual page 30

English
3
2
Press down the trigger lockout (1)
N
and pull the throttle trigger (2) at the
same time. Set Master Control
lever (3) to starting throttle
position (n).
Set choke lever to required position.
N
Choke shutter closed (l)
4
if the engine is cold (also use this
–
position if the engine stopped when
you opened the throttle after
starting)
28
Choke shutter open (j)
1
if the engine is warm, i.e. if it has
–
been running for about one minute.
Hold and start your saw as
N
described.
When engine begins to fire
Move the choke lever (4) to the
N
open position (j).
Hold and start your saw as
N
described.
As soon as the engine runs
4
Press down trigger lockout and the
N
blip the throttle trigger (2) – the
Master Control lever (3) moves to
the run position (F) and the engine
settles down to idling speed.
4
Pull the hand guard toward the
N
handlebar to disengage the chain
brake.
NOTICE
Always disengage chain brake before
accelerating the engine. High revs with
the chain brake engaged (chain locked)
will quickly damage the clutch and chain
brake.
3
2
MS 193 C