Cleaning the lint filter
The lint is collected by the lint filter in
the door. The lint filter must be cleaned
after every program.
^ Pull the lint filter out its filter frame in
the door (1).
^ Wipe or vacuum the lint off the filter.
Do not use sharp objects.
^ Any lint remaining in the hollow part
of the door can be removed through
the gap at the bottom with a dust
brush or vacuum.
Cleaning and Care
^ Clean the door gasket (2) with a
damp cloth.
The lint filter can be rinsed with hot
water if clogged or clotted.
^ Rinse the filter with hot water.
^ Dry the lint filter before putting it back
in place.
Inserting the lint filter
^ Return the cleaned lint filter.
^ Close the door.
,
Check and clean the lint filter
when the following message shows:
"Clean out airways".
19