Samsung RS26TKA User Manual page 19

INSTALLING THE WATER DISPENSER LINE(CONT'D)
Connecting the water line to the refrigerator
1. Remove the cap from water line on the unit and insert compression nut to the water line on the
unit after disassembling from provided water line.
2. Connect both water line from the unit and water line in the kit.
3. Tighten the compression nut onto the compression fitting. There should be no gaps between
(A, B & C)
4. Turn water on and check for any leakage.
Loosen a
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to make
sure you get a snug, leak-free connection.
Before being used, the leakage in these places should be examined.
CAUTION
• Samsung Warranty does not cover WATER LINE INSTALLATION.
• It will be done at customer's charge unless the retail price
includes installation cost.
• Please contact Plumber or Authorized Installer for the installation
if needed.
• If Water leakage occurs due to improper installation, Please
contact installer.
When using power cord
To prevent power cord damage, after product installation, arrange
the remaining power cord to the unit cover and fix.
Remove
cap
Water Line
from unit
No gap
Water Line
from unit
setting up_19