Table of Contents
Advertisement
Follow the operational directions in this section to work with advanced functionality and features of the Art Cool Mirror Wall Mounted system.
Jet Cool/Heat Operation
Rapid Cooling and Heating of Room Temperature
This functionality allows you to rapidly cool indoor air (during sum-
mer months) or warm indoor air (during winter months).
1. Press
to turn on the power.
2. Press the Jet button
• In jet cool mode, unit operates at a setpoint of 65 °F (18 °C) for a
duration of 30 minutes.
• In jet heat mode, unit operates at a setpoint of 86 °F (30 °C) for a
duration of 30 minutes.
• Jet cool/heat mode cannot be run during air circulation, auto, or auto
changeover mode.
• This function may not be available on all models.
Plasma Purification Operation
The plasma filter removes microscopic contaminants from the intake
air thereby supplying clean air to the indoor area.
1. Press
to turn on the power.
2. Press the Plasma button
•
is displayed on the remote controller display screen.
• You can press the Plasma button to initiate this function without
the need of turning on the air conditioner.
• The plasma light and cooling light will illuminate while plasma
purification is active.
• This function may not be available on all models.
auto Clean Operation
Indoor Air Purification
While in cooling and dehumidifying mode, the air conditioner gener-
ates moisture on the interior of the indoor unit. The auto clean
operation is used to remove this type of moisture.
1. Press
to turn on the power.
2. Press
to start dehumidifying operation.
•
is displayed on the remote controller display screen.
• If the power is turned off, the fan will operate for 30 minutes and will
clean the inside of the indoor unit.
• Some buttons (functionality) will not operate while the system is in
auto cleaning mode.
°C/°F Screen Display
The Single Zone Art Cool Mirror unit can be set in either °C or °F
temperature readout, by pressing and holding the Room Tempera-
ture button
for 5 seconds.
.
.
Due to our policy of continuous product innovation, some specifications may change without notification.
advanCed funCtiOns
Jet Cool/Heat Operation -
Auto Changeover Operation
auto Operation
(Cooling Only Models)
During this functionality, the fan speed and the temperature adjust
automatically, based on room temperature.
1. Press
to turn on the power.
2. Press the Mode button
(see icon in Figure 9 below).
3. Press the up and down buttons
numerical operation code for cooling/heating strength. See the
table in Figure 9 below for a description of each numerical value.
• During the auto operation mode, you cannot adjust the fan speed.
• During this mode, you can set the air deflector to rotate automatically.
• This function may not be available on all models.
Figure 9: Auto Operation Display with Code Description
auto Changeover Operation
This functionality changes the operation mode automatically to main-
tain a set temperature of ± 3.6 °F (±2°C).
1. Press
to turn on the power.
2. Press the Mode button
over
(see icon display in red box in Figure 10 below).
3. Press the up and down buttons
temperature.
• The temperature range is 64.4 °F (18 °C) through 86 °F (30 °C).
4. Press
repeatedly as needed to adjust the fan speed.
• This function may not be available on all models.
• Your display screen might appear slightly different depending on
your model.
Auto Changeover
Figure 10: Auto Changeover Display
repeatedly to select auto operation
to select the desired
Code Description
2
Cool
1
Cool slightly
0
Maintain
room
temperature
-1
Heat slightly
-2
Heat
repeatedly to select auto change-
to select the desired
15
Hide quick links:
Advertisement
Table of Contents
