Table of Contents
Advertisement
Connect the water supply
hose
Subsequent to connection
Water drainage
If in any doubt, have the water connection carried out
by an authorized technician.
The water supply hose must not be:
q Bent or squashed.
q Modified or cut through (stability can no longer be
Observe the water pressure in the supply network:
q The water pressure should be between 1 ... and
q A pressure reducing valve must be installed if the
1. Connect the water supply hose to the tap.
min. 10 mm
2. Turn on the water tap completely, and check
Caution
Do not bend or pull the water drainage hose.
Height difference between the placement area and
drainage point: maximum 100 cm.
guaranteed).
10 bars (when the tap is turned on, at least 8 litres
of water is discharged per minute).
maximum water pressure is exceeded.
connection points for water tightness.
43
Hide quick links:
Advertisement
Table of Contents
