Download
Share
Print this page
Baxi 741FS Owner's Manual
  1. Manuals
  2. Brands
  3. Baxi Manuals
  4. Indoor Fireplace
  5. 741FS
  6. Owner's manual
Baxi 741FS Owner's Manual

Baxi 741FS Owner's Manual

Inset live fuel effect gas fire
Hide thumbs Also See for 741FS:

Advertisement

Quick Links

5110263/01
OWNER GUIDE
Model 741FS
Heat Engine
(GC No. 32-032-56)
INSET LIVE FUEL EFFECT GAS FIRE
INCORPORATING THE
CONTROL
THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20).
WHEN CONVERTED USING CONVERSION KIT NO. 0595211 THIS APPLIANCE
IS FOR USE WITH PROPANE GAS (G31).
THIS APPLIANCE IS SUITABLE ONLY FOR INSTALLATION IN THE UNITED
KINGDOM (GB) AND THE REPUBLIC OF IRELAND (IE).
We trust that this guide gives sufficient details to enable your appliance to be operated
and maintained satisfactorily. However, if further information is required please
telephone 01302 349 231.
This guide is intended to help you care for your gas fire. Please read thoroughly before
using and keep for future reference.
This guide to be left with the owner
© Baxi Heating U.K. Ltd.

Advertisement

loading

Related Manuals for Baxi 741FS

Summary of Contents for Baxi 741FS

  • Page 1 However, if further information is required please telephone 01302 349 231. This guide is intended to help you care for your gas fire. Please read thoroughly before using and keep for future reference. This guide to be left with the owner © Baxi Heating U.K. Ltd.
  • Page 2 Installer Guide and should not be fitted directly on to a carpet. Baxi Fires Division, Erdington, Birmingham B24 9QP Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication...

  • Page 3: Table Of Contents

    OWNER GUIDE LIST OF CONTENTS Section Page SAFETY GAS CONSUMPTION APPLIANCE DIMENSIONS OPERATING YOUR FIRE The Oxysafe flame sensing & flue blockage safety system. To light the fire. To turn the fire off. Lighting with a taper. CLEANING YOUR FIRE Metal parts.

  • Page 4: Safety

    OWNER GUIDE SAFETY IF YOU SMELL GAS DON’T SMOKE EXTINGUISH ALL NAKED FLAMES DON’T TURN ELECTRICAL SWITCHES ON OR OFF TURN OFF THE GAS SUPPLY AT THE METER OPEN DOORS AND WINDOWS TO GET RID OF THE GAS IMMEDIATELY CALL THE GAS EMERGENCY SERVICE - SEE YOUR LOCAL TELEPHONE DIRECTORY Do have the fire installed by a competent person.
  • Page 5 OWNER GUIDE Please bear this in mind if you are making any alterations to the room. Do provide a suitable guard that complies with BS 8423 for the protection of young children, the elderly and the infirm. Such a guard is also recommended for the protection of pet animals.

  • Page 6: Gas Consumption

    OWNER GUIDE APPLIANCE DIMENSIONS See graph Dimension Description (mm) Appliance height (mm) Appliance width (mm) Appliance depth into room (mm) Minimum mandatory clearance to combustible surfaces projecting beyond the front of appliance (mm). Recommended clearance to non-combustible surfaces for access purposes (mm). Figure 5.

  • Page 7: Operating Your Fire

    OWNER GUIDE Model 741 when converted using kit number 0595211 Has a maximum propane gas input of 6.7kW (Gross) Has a maximum propane gas output of 3.71kW Has a minimum propane gas input of 4.3kW (Gross) Has a minimum propane gas output of 2.23kW OPERATING YOUR FIRE PLEASE NOTE When operating your fire for the first time, some vapours may be given off which may...

  • Page 8: To Turn The Fire Off

    OWNER GUIDE 2. Keep the button at the ignition position for a further ten seconds. This will prevent the flame-sensing device from shutting off the gas while its probe warms up as explained above. 3. If low heat is required, release the button. The button will automatically spring up to the low heat position shown in figure 2 (See note i below).

  • Page 9: Cleaning Your Fire

    OWNER GUIDE slide control as described above. CLEANING YOUR FIRE To maintain the high performance and quality finish of your fire please follow these guidelines: Before attempting to clean the fire, please remember to turn off the fire and wait for the appliance to cool.

  • Page 10: Ceramic Fuel Bed Refitting

    OWNER GUIDE CERAMIC FUEL BED REFITTING The installer and owner guide for the ceramic fuel effect is separate from this guide. The installer may have attached it to this guide or placed it inside. It is important that the installer and owner guide for the ceramic fuel effect is followed correctly. If replacing the ceramic fuel effect, where a new guide is supplied, follow the installer and owner guide supplied with the replacement fuel effect.

  • Page 11: Servicing

    OWNER GUIDE Servicing. IMPORTANT To help us quickly help you, please try to have the following information available before you contact us: Type of fire. Model/Name. Serial Number. You will also be asked for the fault, problem or request plus your Post Code. If you wish to replace any of the ceramic fuel effect pieces, spare parts are available nationwide via the ‘interpart stockist network’.