Automatic Icemaker - GE 25 Owner's Manual And Installation

About the automatic icemaker.
A newly-installed refrigerator may take 12 to 24 hours to begin making ice.
Power switch
Power
Feeler arm
light

Automatic Icemaker

The icemaker will produce seven cubes per
cycle—approximately 100–130 cubes in a
24-hour period, depending on freezer
compartment temperature, room
temperature, number of door openings
and other use conditions.
If the refrigerator is operated before the
water connection is made to the icemaker,
set the power switch in the OFF position.
When the refrigerator has been connected
to the water supply, set the power switch to
the ON position.
The icemaker will fill with water when it cools
to freezing. A newly-installed refrigerator
may take 12 to 24 hours to begin making
ice cubes.
Throw away the first few batches of ice to
allow the water line to clear.
Be sure nothing interferes with the sweep of
the feeler arm.
When the bin fills to the level of the feeler
arm, the icemaker will stop producing ice.
Ice Storage Drawer
To access ice, pull the drawer forward.
To remove the drawer, pull it straight out and
lift it past the stop location.
www.GEAppliances.com
It is normal for several cubes to be joined
together.
If ice is not used frequently, old ice cubes
will become cloudy, taste stale and shrink.
There is an upper freezer shelf
above the icemaker that can be
used for storage.
11