D-Link AirPlus DWL-900AP+ Manual page 17

Using the Configuration Menu (continued)
Note: The repeater function is
available with at least firmware
version 2.20 or above. For the latest
drivers and firmware downloads,
please go to www.support.dlink.com.
Repeater: This mode will allow
you to extend the range of your
wireless network. The repeater
mode will work with another
D-Link AirPlus DWL-900AP+,
DI-614+, DI-714P+, AirPro
DI-764, DI-754 (with inserted
DWL-650+), or AirPremier
DWL-1000AP+.
Note! If you use the DWL-900AP+
in Wireless Client or Repeater
Mode, make sure that you enter the
Ethernet Mac Address (LAN MAC
Address) of the unit that you want to
extend the wireless coverage.