Behringer MOTOR 61 User Manual page 32

32
MOTÖR 61 / MOTÖR 49 User Manual
10.5 Renaming a Preset
1. Return to the main preset window by either pressing the BACK button a few
times, or press the EDIT button and select the PRESET menu.
2. Rotate the DATA knob and scroll down to item 3. RENAME PRESET, then press
the DATA knob to select.
3. Rotate the DATA knob to select the preset you would like to rename, then
press the DATA button to select it. In the example below, we have chosen
preset 11 that we made previously. (Empty presets cannot be renamed.)
4. The first letter of the preset will be highlighted (in this example the D
in DEFAULT).
5. Rotate the DATA knob to move to a letter that you want to change, and then
press the DATA knob to select this highlighted letter.
6. Rotate the DATA knob to scroll through special characters, numbers,
and the alphabet:
Blank space,!"#$%&'()*+,-./ 0123456789 :;<=>? A to Z.
To get to a blank space, rotate the DATA knob fast counter-clockwise. To get
to Z, rotate it fast clockwise. Names up to 10 characters long can be created.
7. When you reach a letter you like, press the DATA knob to set, and turn the
knob to move to the next character in the preset name to change.
8. Repeat steps 5, 6, and 7 until you are happy with the name of the preset,
then you must press the FWD button to save it.
If you forget to press FWD then the new name will not be
changed.
9. Success! The new name has been saved. In our example, preset 11 has
changed from DEFAULT to STUDIO 4.