Language Selection; Menu List - Panasonic HDC-SD100 Operating Instructions Manual

You can select the language on the screen display and the menu screen.
1
2
*1 It is not displayed when the AUTO/MANUAL switch is set to AUTO.
*2 It is not displayed when the intelligent auto mode is set to [ON].
Part of the menu will not be used depending on the used functions. (F 121)
w [BASIC]
[SCENE MODE]
[D.ZOOM] (F 43)
[GUIDE LINES]
[SET WORLD TIME] (F 28)
w [RECORD SETUP]
[FACE FRAMING] (F 49)
[REC MODE] (F 38)
[DIGITAL CINEMA]
[FADE COLOUR] (F 47)
[WIND CUT]
[MIC SETUP] (F 53)
[MIC LEVEL]
[AGS] (F 33)
[HI-SPEED BURST]
[FLASH] (F 55)
[FLASH LEVEL] (F 55)
[RED EYE] (F 55)
[SHTR SOUND] (F 55)
Downloaded From CamcorderManual.com Panasonic Manuals

Language selection

Press the MENU button, then select [LANGUAGE] and press the cursor
button.
Select [English] and press the cursor button.

Menu list

Recording mode
*1
(F 58)
*2
(F 52)
*2
(F 52)
*1
(F 59)
*1
(F 60)
*2
(F 54)
w [ADVANCED]
[REC LAMP]
The recording lamp lights up during recording
and flashes when the unit receives a signal
from the remote control or when the self-timer
is counting down. When this is set to [OFF], it
does not light during recording.
*2
[AUTO SLOW SHTR] (F 55)
[SHOOTING GUIDE] (F 39)
[Digital Cinema Colour] (F 56)
*1
[PICTURE ADJUST] (F 61)
*1
[MF ASSIST] (F 65)
*1
[ZEBRA] (F 61)
*1
[LUMINANCE] (F 62)
*1
[HISTOGRAM] (F 63)
23
VQT1T90