Panasonic PT-RZ670 series Command Manual page 200

Unused
35
34 Exhaust air temperature sensor disconnected
Optical module temperature sensor
33
disconnected
32 Intake air temperature sensor disconnected
31 Luminance sensor error
30 Unused
29 Unused
28 Low AC voltage warning
27 PW2 error (FPGA)
26 PW2 error (FM)
25 PW1 error (FPGA)
24 PW1 error (FM)
23 AC7
22 AC6
21 AC5
20 AC4
19 AC3
18 AC2
17 AC1
16 AC0
15 AA7
14 AA6
13 AA5
12 AA4
11 AA3
10 AA2
9 AA1
8 AA0
7 Optical module low temperature error
6 Exhaust air high temperature error
5 Optical module high temperature error
4 Intake air temperature error
3 Optical module low temperature warning
2 Exhaust air high temperature warning
1 Optical module high temperature warning
0 Intake air temperature warning
Unused
Exhaust air thermosensor has breaking of wire, or connector (M11/BR4) is
disconnected.
DMD thermosensor has breaking of wire, or connector (DG4/FM2) is disconnected.
Intake air thermosensor has breaking of wire, or connector (M11/DG18) is
disconnected.
Luminance sensor proportion is abnormal.
Luminance is abnormal.
Low AC voltage.
Phosphor1 wheel or circuit are failure.
Phosphor2 wheel or circuit are failure.
Internal Warning.
The temperature inside this projector has become high or ambient
temperature is too low.
- The ventilation holes may be closed.
- The ambient temperature in the place of use may
be too high or low.
- Heatsink mounting is abnormal
- High altitude mode is mis select
200/200